• Recent Posts

  • AmazonExam

  • Braindumps

    Easy Pass Exams!
  • Testking

    Easy Pass Exams!
  • ExamCollection

    Easy Pass Exams!
  •  

    HOT 70-410 Exam VCE Dumps >> Free Download

    HOT 70-411 Exam VCE Dumps >> Free Download

    HOT 70-412 Exam VCE Dumps >> Free Download

    HOT 70-413 Exam VCE Dumps >> Free Download

    HOT 70-414 Exam VCE Dumps >> Free Download

    HOT 70-415 Exam VCE Dumps >> Free Download

    HOT 70-416 Exam VCE Dumps >> Free Download

    HOT 70-417 Exam VCE Dumps >> Free Download

    NEW 70-432 Exam VCE Dumps >> Free Download

    NEW 70-448 Exam VCE Dumps >> Free Download

    NEW 70-457 Exam VCE Dumps >> Free Download

    NEW 70-458 Exam VCE Dumps >> Free Download

    NEW 70-459 Exam VCE Dumps >> Free Download

    HOT 70-460 Exam VCE Dumps >> Free Download

    HOT 70-461 Exam VCE Dumps >> Free Download

    HOT 70-462 Exam VCE Dumps >> Free Download

    HOT 70-463 Exam VCE Dumps >> Free Download

    HOT 70-464 Exam VCE Dumps >> Free Download

    HOT 70-465 Exam VCE Dumps >> Free Download

    HOT 70-466 Exam VCE Dumps >> Free Download

    HOT 70-467 Exam VCE Dumps >> Free Download

    HOT 70-469 Exam VCE Dumps >> Free Download

    NEW 70-470 Exam VCE Dumps >> Free Download

    NEW 70-480 Exam VCE Dumps >> Free Download

    NEW 70-481 Exam VCE Dumps >> Free Download

    NEW 70-482 Exam VCE Dumps >> Free Download

    HOT 70-483 Exam VCE Dumps >> Free Download

    NEW 70-484 Exam VCE Dumps >> Free Download

    NEW 70-485 Exam VCE Dumps >> Free Download

    NEW 70-486 Exam VCE Dumps >> Free Download

    NEW 70-487 Exam VCE Dumps >> Free Download

    HOT 70-488 Exam VCE Dumps >> Free Download

    NEW 70-489 Exam VCE Dumps >> Free Download

    NEW 70-490 Exam VCE Dumps >> Free Download

    NEW 70-491 Exam VCE Dumps >> Free Download

    NEW 70-492 Exam VCE Dumps >> Free Download

    NEW 70-494 Exam VCE Dumps >> Free Download

    NEW 70-496 Exam VCE Dumps >> Free Download

    NEW 70-497 Exam VCE Dumps >> Free Download

    NEW 70-498 Exam VCE Dumps >> Free Download

    NEW 70-499 Exam VCE Dumps >> Free Download

    NEW 70-511 Exam VCE Dumps >> Free Download

    NEW 70-513 Exam VCE Dumps >> Free Download

    NEW 70-515 Exam VCE Dumps >> Free Download

    NEW 70-516 Exam VCE Dumps >> Free Download

    NEW 70-517 Exam VCE Dumps >> Free Download

    HOT 70-532 Exam VCE Dumps >> Free Download

    HOT 70-533 Exam VCE Dumps >> Free Download

    HOT 70-534 Exam VCE Dumps >> Free Download

    NEW 70-573 Exam VCE Dumps >> Free Download

    NEW 70-576 Exam VCE Dumps >> Free Download

    NEW 70-640 Exam VCE Dumps >> Free Download

    NEW 70-642 Exam VCE Dumps >> Free Download

    NEW 70-646 Exam VCE Dumps >> Free Download

    NEW 70-659 Exam VCE Dumps >> Free Download

    NEW 70-662 Exam VCE Dumps >> Free Download

    NEW 70-663 Exam VCE Dumps >> Free Download

    NEW 70-667 Exam VCE Dumps >> Free Download

    NEW 70-668 Exam VCE Dumps >> Free Download

    NEW 70-673 Exam VCE Dumps >> Free Download

    HOT 70-680 Exam VCE Dumps >> Free Download

    NEW 70-685 Exam VCE Dumps >> Free Download

    NEW 70-686 Exam VCE Dumps >> Free Download

    NEW 70-687 Exam VCE Dumps >> Free Download

    HOT 70-688 Exam VCE Dumps >> Free Download

    NEW 70-689 Exam VCE Dumps >> Free Download

    NEW 70-692 Exam VCE Dumps >> Free Download

    NEW 70-694 Exam VCE Dumps >> Free Download

    NEW 70-695 Exam VCE Dumps >> Free Download

    NEW 70-696 Exam VCE Dumps >> Free Download

    NEW 70-697 Exam VCE Dumps >> Free Download

    NEW 70-980 Exam VCE Dumps >> Free Download

    NEW 70-981 Exam VCE Dumps >> Free Download

    NEW 74-335 Exam VCE Dumps >> Free Download

    NEW 74-338 Exam VCE Dumps >> Free Download

    NEW 74-343 Exam VCE Dumps >> Free Download

    NEW 74-344 Exam VCE Dumps >> Free Download

    HOT 74-409 Exam VCE Dumps >> Free Download

    NEW 74-674 Exam VCE Dumps >> Free Download

    NEW 74-678 Exam VCE Dumps >> Free Download

    HOT 74-697 Exam VCE Dumps >> Free Download

    NEW 77-427 Exam VCE Dumps >> Free Download

  • « | Main | »

    [New AmazonExam Dumps] Recently Published Exam 70-411 Q&A 1-10 Administering Windows Server 2012 R2 Exam SharePoint Server 2013 Exam VCE and PDF Dumps For Free Share

    By admin | December 7, 2015

    Tagged with:

    New Updated 70-411 Exam Questions from AmazonExam 70-411 pdf dumps!

    Welcome to download the newest AmazonExam dumps:70-411 http://www.amazonexam.com/70-411.html

    QUESTION 1
    Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
    Server1 has the following role services installed:
    DirectAccess and VPN (RRAS)
    Network Policy Server
    Remote users have client computers that run either Windows XP, Windows 7, or Windows 8.
    You need to ensure that only the client computers that run Windows 7 or Windows 8 can establish VPN connections to Server1.
    What should you configure on Server1?
    A. A condition of a Network Policy Server (NPS) network policy
    B. A constraint of a Network Policy Server (NPS) network policy
    C. a condition of a Network Policy Server (NPS) connection request policy
    D. A vendor-specific RADIUS attribute of a Network Policy Server (NPS) connection request policy
    Correct Answer: A
    Explanation
    Explanation/Reference:
    Explanation:
    If you want to configure the Operating System condition, click Operating System, and then click Add. In Operating System Properties, click Add, and then specify
    the operating system settings that are required to match the policy.
    The Operating System condition specifies the operating system (operating system version or service pack number), role (client or server), and architecture (x86,
    x64, or ia64) required for the computer configuration to match the policy.
    QUESTION 2
    You are a network administrator of an Active Directory domain named contoso.com.
    You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role and the Network Policy Server role service
    installed.
    You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1.
    You need to create a DHCP policy that will apply to all of the NAP non-compliant DHCP clients.
    Which criteria should you specify when you create the DHCP policy?
    A. The client identifier
    B. The user class
    C. The vendor class
    D. The relay agent information
    Correct Answer: B
    Explanation
    Explanation/Reference:

    image

    To configure a NAP-enabled DHCP server
    1. On the DHCP server, click Start, click Run, in Open, type dhcpmgmt. smc, and then press
    ENTER.
    2. In the DHCP console, open <servername>\IPv4.
    3. Right-click the name of the DHCP scope that you will use for NAP client computers, and then
    click Properties.
    4. On the Network Access Protection tab, under Network Access Protection Settings, choose
    Enable for this scope, verify that Use default Network Access Protection profile is selected,
    and then click OK.
    ★ Instant Download ★ PDF  ★ 100% Passing Guarantee ★ 100% Money Back Guarantee
    5. In the DHCP console tree, under the DHCP scope that you have selected, right-click Scope
    Options, and then click Configure Options.
    6. On the Advanced tab, verify that Default User Class is selected next to User class.
    7. Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for
    the default gateway used by compliant NAP client computers, and then click Add.
    8. Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP
    address for each router to be used by compliant NAP client computers, and then click Add.
    9. Select the 015 DNS Domain Name check box, and in String value, under Data entry, type your
    organization’s domain name (for example, woodgrovebank. local), and then click Apply. This
    domain is a full-access network assigned to compliant NAP clients.
    10.On the Advanced tab, next to User class, choose Default Network Access Protection Class.
    11.Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for
    the default gateway used by noncompliant NAP client computers, and then click Add. This
    can be the same default gateway that is used by compliant NAP clients.
    12.Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP
    address for each DNS server to be used by noncompliant NAP client computers, and then click
    Add. These can be the same DNS servers used by compliant NAP clients.
    13.Select the 015 DNS Domain Name check box, and in String value, under Data entry, type a
    name to identify the restricted domain (for example, restricted. Woodgrovebank. local), and
    then click OK. This domain is a restricted-access network assigned to noncompliant NAP
    clients.
    14.Click OK to close the Scope Options dialog box.
    15.Close the DHCP console.
    http : //technet . microsoft . com/en-us/library/dd296905%28v=ws . 10%29 .aspx
    QUESTION 3
    Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has
    the Network Policy Server role service installed.
    An administrator creates a RADIUS client template named Template1.
    You create a RADIUS client named Client1 by using Template 1.
    You need to modify the shared secret for Client1.
    What should you do first?
    A. Configure the Advanced settings of Template1.
    B. Set the Shared secret setting of Template1 to Manual.
    C. Clear Enable this RADIUS client for Client1.
    D. Clear Select an existing template for Client1.
    Correct Answer: D
    Explanation
    Explanation/Reference:
    Explanation:
    Clear checkmark for Select an existing template in the new client wizard.
    In New RADIUS Client, in Shared secret, do one of the following:
    Bullet Ensure that Manual is selected, and then in Shared secret, type the strong password that is also entered on the RADIUS client. Retype the shared secret in
    Confirm shared secret.

    image

    image

    QUESTION 4
    Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
    The domain contains a server named Server1 that has the Network Policy Server server role and the Remote Access server role installed. The domain contains a
    server named Server2 that is configured as a RADIUS server.
    Server1 provides VPN access to external users.
    You need to ensure that all of the VPN connections to Server1 are logged to the RADIUS server on Server2.
    What should you run?
    A. Add-RemoteAccessRadius -ServerNameServer1 -AccountingOnOffMsg Enabled -SharedSecret "Secret" -Purpose Accounting
    B. Set-RemoteAccessAccounting -AccountingOnOffMsg Enabled -AccountingOnOffMsg Enabled
    C. Add-RemoteAccessRadius -ServerName Server2 -AccountingOnOffMsg Enabled -SharedSecret "Secret" -Purpose Accounting
    D. Set-RemoteAccessAccounting -EnableAccountingType Inbox -AccountingOnOffMsg Enabled
    Correct Answer: C
    Explanation
    Explanation/Reference:
    Explanation:
    Add-RemoteAccessRadius
    Adds a new external RADIUS server for VPN authentication, accounting for DirectAccess (DA) and VPN, or one-time password (OTP) authentication for DA.
    AccountingOnOffMsg<String>
    Indicates the enabled state for sending of accounting on or off messages. The acceptable values for this parameter are:
    Enabled.
    Disabled. This is the default value.
    This parameter is applicable only when the RADIUS server is being added for Remote Access accounting.
    QUESTION 5
    Your network contains four Network Policy Server (NPS) servers named Server1, Server2, Servers, and Server4.
    Server1 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1.
    You need to ensure that Server2 and Server3 receive connection requests. Server4 must only receive connection requests if both Server2 and Server3 are
    unavailable.
    How should you configure Group1?
    A. Change the Weight of Server4 to 10.
    B. Change the Weight of Server2 and Server3 to 10.
    C. Change the Priority of Server2 and Server3 to 10.
    D. Change the Priority of Server4 to 10.
    Correct Answer: D
    Explanation
    Explanation/Reference:
    During the NPS proxy configuration process, you can create remote RADIUS server groups and then add RADIUS servers to each group. To configure load
    balancing, you must have more than one RADIUS server per remote RADIUS server group. While adding group members, or after creating a RADIUS server as a
    group member, you can access the Add RADIUS server dialog box to configure the following items on the Load Balancing tab:

    Explanation:
    Priority. Priority specifies the order of importance of the RADIUS server to the NPS proxy server. Priority level must be assigned a value that is an integer, such as
    1, 2, or 3. The lower the number, the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is assigned the highest priority of
    1, the NPS proxy sends connection requests to the RADIUS server first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS
    servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and then use the Weight setting to load balance between them.
    Weight. NPS uses this Weight setting to determine how many connection requests to send to each group member when the group members have the same priority
    level. Weight setting must be assigned a value between 1 and 100, and the value represents a percentage of 100 percent. For example, if the remote RADIUS
    server group contains two members that both have a priority level of 1 and a weight rating of 50, the NPS proxy forwards 50 percent of the connection requests to
    each RADIUS server.
    Advanced settings. These failover settingsprovide a way for NPS to determine whether the remote RADIUS server is unavailable. If NPS determines that a RADIUS
    server is unavailable, it can start sending connection requests to other group members. With these settings you can configure the number of seconds that the NPS
    proxy waits for a response from the RADIUS server before it considers the request dropped; the maximum number of dropped requests before the NPS proxy
    identifies the RADIUS server as unavailable; and the number of seconds that can elapse between requests before the NPS proxy identifies the RADIUS server as
    unavailable.
    The default priority is 1 and can be changed from 1 to 65535. So changing server 2 and 3 to priority 10 is not the way to go.

    image

    http: //technet. microsoft. com/en-us/library/dd197433(WS. 10). aspx
    QUESTION 6
    Your network contains an Active Directory domain named adatum.com.
    A network administrator creates a Group Policy central store.
    After the central store is created, you discover that when you create new Group Policy objects (GPOs), the GPOs do not contain any Administrative Templates.
    You need to ensure that the Administrative Templates appear in new GPOs.
    What should you do?
    A. Add your user account to the Group Policy Creator Owners group.
    B. Configure all domain controllers as global catalog servers.
    C. Copy files from %Windir%\Policydefimtions to the central store.
    D. Modify the Delegation settings of the new GPOs.
    Correct Answer: C
    Explanation
    Explanation/Reference:
    Explanation:
    To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location
    that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later
    replicated to all domain controllers in the domain.
    QUESTION 7
    Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains 500 client
    computers that run Windows 8 Enterprise.
    You implement a Group Policy central store.
    You have an application named App1. App1 requires that a custom registry setting be deployed to all of the computers.
    You need to deploy the custom registry setting. The solution must minimize administrator effort.
    What should you configure in a Group Policy object (GPO)?

    A. The Software Installation settings
    B. The Administrative Templates
    C. An application control policy
    D. The Group Policy preferences
    Correct Answer: D
    Explanation
    Explanation/Reference:
    Explanation:
    Open the Group Policy Management Console. Right-click the Group Policy object (GPO) that should contain the new preference item, and then click Edit.
    In the console tree under Computer Configuration or User Configuration, expand the Preferences folder, and then expand the Windows Settings folder.
    Right-click the Registry node, point to New, and select Registry Item . Group Policy preferences provide the means to simplify deployment and standardize
    configurations. They add to Group Policy a centralized system for deploying preferences (that is, settings that users can change later).
    You can also use Group Policy preferences to configure applications that are not Group Policy- aware. By using Group Policy preferences, you can change or
    delete almost any registry setting, file or folder, shortcut, and more. You are not limited by the contents of Administrative Template files. The Group Policy
    Management
    Editor (GPME) includes Group Policy preferences.
    http: //technet.microsoft.com/en-us/library/gg699429.aspx http: //www. unidesk. com/blog/gpos-set-custom-registry-entries-virtual-desktops-disabling-machine-
    password

    image

    image

    QUESTION 8
    Your network contains two Active Directory forests named contoso.com and dev.contoso.com. The contoso.com forest contains a domain controller named DC1.
    The dev.contoso.com forest contains a domain controller named DC2. Each domain contains an organizational unit (OU) named OU1.
    Dev.contoso.com has a Group Policy object (GPO) named GPO1. GPO1 contains 200 settings, including several settings that have network paths. GPO1 is linked
    to OU1.
    You need to copy GPO1 from dev.contoso.com to contoso.com.
    What should you do first on DC2?
    A. From the Group Policy Management console, right-click GPO1 and select Copy.
    B. Run the mtedit.exe command and specify the /Domaintcontoso.com /DC: DC 1 parameter.
    C. Run the Save-NetGpocmdlet.
    D. Run the Backup-Gpocmdlet.
    Correct Answer: A
    Explanation
    Explanation/Reference:
    To copy a Group Policy object:
    In the GPMC console tree, right-click the GPO that you want to copy, and then click Copy.
    To create a copy of the GPO in the same domain as the source GPO, right-click Group Policy objects, click Paste, specify permissions for the new GPO in the Copy
    GPO box, and then click OK .
    For copy operations to another domain, you may need to specify a migration table.
    The Migration Table Editor (MTE) is provided with Group Policy Management Console (GPMC) to facilitate the editing of migration tables. Migration tables are used
    for copying or importing Group Policy objects (GPOs) from one domain to another, in cases where the GPOs include domain-specific information that must be
    updated during copy or import.
    Source WS2008R2: Backup the existing GPOs from the GPMC, you need to ensure that the "Group Policy Objects" container is selected for the "Backup Up All"
    option to be available.
    Copy a Group Policy Object with the Group Policy Management Console (GPMC)
    You can copy a Group Policy object (GPO) either by using the drag-and-drop method or right- click method.
    Applies To: Windows 8, Windows Server 2008 R2, Windows Server 2012
    Ref: http://technet.microsoft.com/en-us/library/cc785343(v=WS.10).aspx
    http://technet.microsoft.com/en-us/library/cc733107.aspx
    QUESTION 9
    Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
    Client computers run either Windows 7 or Windows 8. All of the client computers have an application named App1 installed.
    The domain contains a Group Policy object (GPO) named GPO1 that is applied to all of the client computers.
    You need to add a system variable named App1Data to all of the client computers.
    Which Group Policy preference should you configure?
    A. Environment
    B. Ini Files
    C. Data Sources
    D. Services
    Correct Answer: A
    Explanation
    Explanation/Reference:
    Explanation:
    Environment Variable preference items allow you to create, update, replace, and delete user and system environment variables or semicolon-delimited segments of
    the PATH variable. Before you create an Environment Variable preference item, you should review the behavior of each type of action possible with this extension.
    QUESTION 10
    Your network contains an Active Directory domain named contoso.com.
    All user accounts reside in an organizational unit (OU) named OU1.
    You create a Group Policy object (GPO) named GPO1. You link GPO1 to OU1. You configure the Group Policy preference of GPO1 to add a shortcut named Link1
    to the desktop of each user. You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop.
    You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again.
    What should you do?
    A. Enforce GPO1.
    B. Modify the Link1 shortcut preference of GPO1.
    C. Enable loopback processing in GPO1.
    D. Modify the Security Filtering settings of GPO1.

    Correct Answer: B
    Explanation
    Explanation/Reference:
    Explanation:
    Replace Delete and recreate a shortcut for computers or users. The net result of the Replace action is to overwrite the existing shortcut. If the shortcut does not
    exist, then the Replace action creates a new shortcut.
    This type of preference item provides a choice of four actions: Create, Replace, Update, and Delete. The behavior of the preference item varies with the action
    selected and whether the shortcut already exists.

    image
    http: //technet.microsoft.com/en-us/library/cc753580.aspx http: //technet.microsoft.com/en-us/library/cc753580.aspx

    New Updated 70-411 Exam Questions from AmazonExam 70-411 pdf dumps!

    Welcome to download the newest AmazonExam dumps:70-411 http://www.amazonexam.com/70-411.html

    116 Total Views 1 Views Today

    Topics: 70-411 | Comments Off on [New AmazonExam Dumps] Recently Published Exam 70-411 Q&A 1-10 Administering Windows Server 2012 R2 Exam SharePoint Server 2013 Exam VCE and PDF Dumps For Free Share

    Tagged with:

    Comments are closed.