• Recent Posts

  • AmazonExam

  • Braindumps

    Easy Pass Exams!
  • Testking

    Easy Pass Exams!
  • ExamCollection

    Easy Pass Exams!
  •  

    HOT 70-410 Exam VCE Dumps >> Free Download

    HOT 70-411 Exam VCE Dumps >> Free Download

    HOT 70-412 Exam VCE Dumps >> Free Download

    HOT 70-413 Exam VCE Dumps >> Free Download

    HOT 70-414 Exam VCE Dumps >> Free Download

    HOT 70-415 Exam VCE Dumps >> Free Download

    HOT 70-416 Exam VCE Dumps >> Free Download

    HOT 70-417 Exam VCE Dumps >> Free Download

    NEW 70-432 Exam VCE Dumps >> Free Download

    NEW 70-448 Exam VCE Dumps >> Free Download

    NEW 70-457 Exam VCE Dumps >> Free Download

    NEW 70-458 Exam VCE Dumps >> Free Download

    NEW 70-459 Exam VCE Dumps >> Free Download

    HOT 70-460 Exam VCE Dumps >> Free Download

    HOT 70-461 Exam VCE Dumps >> Free Download

    HOT 70-462 Exam VCE Dumps >> Free Download

    HOT 70-463 Exam VCE Dumps >> Free Download

    HOT 70-464 Exam VCE Dumps >> Free Download

    HOT 70-465 Exam VCE Dumps >> Free Download

    HOT 70-466 Exam VCE Dumps >> Free Download

    HOT 70-467 Exam VCE Dumps >> Free Download

    HOT 70-469 Exam VCE Dumps >> Free Download

    NEW 70-470 Exam VCE Dumps >> Free Download

    NEW 70-480 Exam VCE Dumps >> Free Download

    NEW 70-481 Exam VCE Dumps >> Free Download

    NEW 70-482 Exam VCE Dumps >> Free Download

    HOT 70-483 Exam VCE Dumps >> Free Download

    NEW 70-484 Exam VCE Dumps >> Free Download

    NEW 70-485 Exam VCE Dumps >> Free Download

    NEW 70-486 Exam VCE Dumps >> Free Download

    NEW 70-487 Exam VCE Dumps >> Free Download

    HOT 70-488 Exam VCE Dumps >> Free Download

    NEW 70-489 Exam VCE Dumps >> Free Download

    NEW 70-490 Exam VCE Dumps >> Free Download

    NEW 70-491 Exam VCE Dumps >> Free Download

    NEW 70-492 Exam VCE Dumps >> Free Download

    NEW 70-494 Exam VCE Dumps >> Free Download

    NEW 70-496 Exam VCE Dumps >> Free Download

    NEW 70-497 Exam VCE Dumps >> Free Download

    NEW 70-498 Exam VCE Dumps >> Free Download

    NEW 70-499 Exam VCE Dumps >> Free Download

    NEW 70-511 Exam VCE Dumps >> Free Download

    NEW 70-513 Exam VCE Dumps >> Free Download

    NEW 70-515 Exam VCE Dumps >> Free Download

    NEW 70-516 Exam VCE Dumps >> Free Download

    NEW 70-517 Exam VCE Dumps >> Free Download

    HOT 70-532 Exam VCE Dumps >> Free Download

    HOT 70-533 Exam VCE Dumps >> Free Download

    HOT 70-534 Exam VCE Dumps >> Free Download

    NEW 70-573 Exam VCE Dumps >> Free Download

    NEW 70-576 Exam VCE Dumps >> Free Download

    NEW 70-640 Exam VCE Dumps >> Free Download

    NEW 70-642 Exam VCE Dumps >> Free Download

    NEW 70-646 Exam VCE Dumps >> Free Download

    NEW 70-659 Exam VCE Dumps >> Free Download

    NEW 70-662 Exam VCE Dumps >> Free Download

    NEW 70-663 Exam VCE Dumps >> Free Download

    NEW 70-667 Exam VCE Dumps >> Free Download

    NEW 70-668 Exam VCE Dumps >> Free Download

    NEW 70-673 Exam VCE Dumps >> Free Download

    HOT 70-680 Exam VCE Dumps >> Free Download

    NEW 70-685 Exam VCE Dumps >> Free Download

    NEW 70-686 Exam VCE Dumps >> Free Download

    NEW 70-687 Exam VCE Dumps >> Free Download

    HOT 70-688 Exam VCE Dumps >> Free Download

    NEW 70-689 Exam VCE Dumps >> Free Download

    NEW 70-692 Exam VCE Dumps >> Free Download

    NEW 70-694 Exam VCE Dumps >> Free Download

    NEW 70-695 Exam VCE Dumps >> Free Download

    NEW 70-696 Exam VCE Dumps >> Free Download

    NEW 70-697 Exam VCE Dumps >> Free Download

    NEW 70-980 Exam VCE Dumps >> Free Download

    NEW 70-981 Exam VCE Dumps >> Free Download

    NEW 74-335 Exam VCE Dumps >> Free Download

    NEW 74-338 Exam VCE Dumps >> Free Download

    NEW 74-343 Exam VCE Dumps >> Free Download

    NEW 74-344 Exam VCE Dumps >> Free Download

    HOT 74-409 Exam VCE Dumps >> Free Download

    NEW 74-674 Exam VCE Dumps >> Free Download

    NEW 74-678 Exam VCE Dumps >> Free Download

    HOT 74-697 Exam VCE Dumps >> Free Download

    NEW 77-427 Exam VCE Dumps >> Free Download

  • « | Main | »

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    By admin | August 8, 2016

    Tagged with:

    Do you want to pass the 400-101 Examsavior exam? What are the new questions of the latest 400-101 exam? Examsavior 400-101 VCE dumps and 400-101 PDF dumps will tell you all about the 400-101 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing  400-101 Examsavior exam.Hurry up and get the free exam from here!

    NOW FREE DOWNLOAD

    http://examsavior.com/70-414

     

     

     

    QUESTION 201

    Refer to the exhibit.

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Which three statements about the output are true? (Choose three.)

    A. This switch is currently receiving a multicast data stream that is being forwarded out VLAN 150.

    B. A multicast receiver has requested to join one or more of the multicast groups.C. Group 224.0.1.40 is a reserved address, and it should not be used for multicast user data transfer.

    D. One or more multicast groups are operating in PIM dense mode.

    E. One or more of the multicast data streams will be forwarded out to neighbor 10.85.20.20.

    F. Group 239.192.1.1 is a reserved address, and it should not be used for multicast user data transfer.

    Correct Answer: ABC

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    A. VLAN 150 shows up in the outgoing interface list so those specific multicast streams are being forwarded to this VLAN.

    B. A receiver has requested to receive the multicast stream associated with the multicast address of 239.192.1.1, that is why this stream appears in the mroute

    table.

    C. The 224.0.1.40 is a reserved multicast group for cisco’s Rp descovery. All cisco routers are members of this grup by default and listen to this group for Cisco

    RP discovery messages advertised by mapping agent even if it is not configured

    QUESTION 202

    Which statement about the RPF interface in a BIDIR-PIM network is true?

    A. In a BIDIR-PIM network, the RPF interface is always the interface that is used to reach the PIM rendezvous point.

    B. In a BIDIR-PIM network, the RPF interface can be the interface that is used to reach the PIM rendezvous point or the interface that is used to reach the source.

    C. In a BIDIR-PIM network, the RPF interface is always the interface that is used to reach the source.

    D. There is no RPF interface concept in BIDIR-PIM networks.

    Correct Answer: A

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    RPF stands for "Reverse Path Forwarding". The RPF Interface of a router with respect to an address is the interface that the MRIB indicates should be used to

    reach that address. In the case of a BIDIR-PIM multicast group, the RPF interface is determined by looking up the Rendezvous Point Address in the MRIB. The

    RPF information determines the interface of the router that would be used to send packets towards the Rendezvous Point Link for the group.

    Reference. https://tools.ietf.org/html/rfc5015

    QUESTION 203

    Which technology is an application of MSDP, and provides load balancing and redundancy between the RPs?A. static RP

    B. PIM BSR

    C. auto RP

    D. anycast RP

    Correct Answer: D

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    Using Anycast RP is an implementation strategy that provides load sharing and redundancy in Protocol Independent Multicast sparse mode (PIM-SM) networks.

    Anycast RP allows two or more rendezvous points (RPs) to share the load for source registration and the ability to act as hot backup routers for each other.

    Multicast Source Discovery Protocol (MSDP) is the key protocol that makes Anycast RP possible.

    Reference.

    www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/anycast.html

    QUESTION 204

    Which two statements are true about IPv6 multicast? (Choose two.)

    A. Receivers interested in IPv6 multicast traffic use IGMPv6 to signal their interest in the IPv6 multicast group.

    B. The PIM router with the lowest IPv6 address becomes the DR for the LAN.

    C. An IPv6 multicast address is an IPv6 address that has a prefix of FF00::/8.

    D. The IPv6 all-routers multicast group is FF02:0:0:0:0:0:0:2.

    Correct Answer: CD

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    Multicast addresses in IPv6 have the prefix ff00::/8.

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Reference. http://en.wikipedia.org/wiki/Multicast_address

    QUESTION 205

    DRAG DROP

    Drag and drop the IPv6 address on the left to the correct IPv6 address type on the right.

    Select and Place:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Correct Answer:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    QUESTION 206

    DRAG DROP

    Drag and drop the BGP attribute on the left to the correct category on the right.

    Select and Place:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Correct Answer:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    QUESTION 207

    DRAG DROP

    Drag and drop the IPv6 multicast feature or protocol on the left to the correct address space on the right.

    Select and Place:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Correct Answer:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    QUESTION 208

    DRAG DROP

    Drag and drop the multicast protocol or feature on the left to the correct address space on the right.

    Select and Place:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Correct Answer:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:QUESTION 209

    DRAG DROP

    Drag and drop the router preference on the left to the correct routing sequence (from most preferred to least preferred) on the right.

    Select and Place:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Correct Answer:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Section: Layer 3 Technologies

    ExplanationExplanation/Reference:

    QUESTION 210

    DRAG DROP

    Drag and drop the OSPF network type on the left to the correct traffic type category on the right.

    Select and Place:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Correct Answer:

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    QUESTION 211

    Refer to the exhibit.

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Which two pieces of information in this Wireshark capture indicate that you are viewing EIGRP traffic? (Choose two.)

    A. the header length

    B. the protocol number

    C. the destination address

    D. the Class Selector

    E. the source address

    F. the header checksum

    Correct Answer: BC

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    EIGRP uses protocol number 88, which shows as EIGRP in the capture. Also, we in the capture that the destination IP address is 224.0.0.10, which is the

    Enhanced Interior Gateway Routing Protocol (EIGRP) group address is used to send routing information to all EIGRP routers on a network segment.

    QUESTION 212

    When BGP route reflectors are used, which attribute ensures that a routing loop is not created?

    A. weight

    B. local preferenceC. multiexit discriminator

    D. originator ID

    Correct Answer: D

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    As the iBGP learned routes are reflected, routing information may loop. The route reflector model has the following mechanisms to avoid routing loops:

    Originator ID is an optional, nontransitive BGP attribute. It is a 4-byte attributed created by a route reflector. The attribute carries the router ID of the originator

    of the route in the local autonomous system. Therefore, if a misconfiguration causes routing information to come back to the originator, the information is

    ignored.

    Cluster-list is an optional, nontransitive BGP attribute. It is a sequence of cluster IDs that the route has passed. When a route reflector reflects a route from its

    clients to nonclient peers, and vice versa, it appends the local cluster ID to the cluster-list. If the cluster-list is empty, a new cluster-list is created. Using this

    attribute, a route reflector can identify if routing information is looped back to the same cluster due to misconfiguration. If the local cluster ID is found in the

    cluster-list, the advertisement is ignored.

    Reference.

    http://www.cisco.com/c/en/us/td/docs/ios/12_2/ip/configuration/guide/fipr_c/1cfbgp.html

    QUESTION 213

    Refer to the exhibit.

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Which statement is true about the downward bit?

    A. It forces the CE router to use a backup link instead of sending traffic via MPLS VPN.

    B. It informs the PE router that the LSA metric has been recently decreased to 1 and that partial SPF calculation cannot be delayed.

    C. It forces the CE router to install the LSA with the downward bit set into its routing table as a discard route.

    D. It informs the PE router that the LSA was already redistributed into BGP by another PE router and that the LSA must not be redistributed into BGP again.

    Correct Answer: D

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    From RFC 4577, specifically section 4.2.5.1

    When a type 3 LSA is sent from a PE router to a CE router, the DN bit [OSPF-DN] in the LSA Options field MUST be set. This is used to ensure that if any CE

    router sends this type 3 LSA to a PE router, the PE router will not redistribute it further.

    When a PE router needs to distribute to a CE router a route that comes from a site outside the latter’s OSPF domain, the PE router presents itself as an ASBR

    (Autonomous System Border Router), and distributes the route in a type 5 LSA. The DN bit [OSPF-DN] MUST be set in these LSAs to ensure that they will be

    ignored by any other PE routers that receive them.QUESTION 214

    Which regular expression will match prefixes that originated from AS200?

    A. ^$

    B. ^200_

    C. _200$

    D. ^200)

    E. _200_

    Correct Answer: C

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Example on how to deny all prefixes originated in Autonomous System 200

    router bgp 100

    neighbor 10.1.1.1 remote-as 65535

    neighbor 10.1.1.1 route-map map1 in

    !

    route-map map1 permit 10

    match as-path 1

    !

    ip as-path access-list 5 deny _200$

    ip as-path access-list 5 permit .*

    Reference.

    http://www.cisco.com/c/en/us/td/docs/ios/termserv/configuration/guide/12_4t/tsv_12_4t_book/tsv_r eg_express.html

    QUESTION 215

    Which statement describes the difference between a stub area and a totally stub area?

    A. The ABR advertises a default route to a totally stub area and not to a stub area.

    B. Stub areas do not allow LSA types 4 and 5, while totally stub areas do not allow LSA types 3, 4, and 5.

    C. Totally stub areas allow limited external routes in the area via a special type 7 LSA, while stub .

    areas do not

    D. Stub areas do not allow external LSAs, ASBR summary LSAs, or summary LSAs with the exception of a default route originated by the ABR via a summary

    LSA.Correct Answer: B

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    Standard areas can contain LSAs of type 1, 2, 3, 4, and 5, and may contain an ASBR. The backbone is considered a standard area.

    Stub areas can contain type 1, 2, and 3 LSAs. A default route is substituted for external routes.

    Totally stubby areas can only contain type 1 and 2 LSAs, and a single type 3 LSA. The type 3 LSA describes a default route, substituted for all external and

    inter-area routes.

    Not-so-stubby areas implement stub or totally stubby functionality yet contain an ASBR. Type 7 LSAs generated by the ASBR are converted to type 5 by

    ABRs to be flooded to the rest of the OSPF domain.

    Reference. http://packetlife.net/blog/2008/jun/24/ospf-area-types/

    QUESTION 216

    Which two statements are true about IS-IS? (Choose two.)

    A. IS-IS DIS election is nondeterministic.

    B. IS-IS SPF calculation is performed in three phases.

    C. IS-IS works over the data link layer, which does not provide for fragmentation and reassembly.

    D. IS-IS can never be routed beyond the immediate next hop.

    Correct Answer: CD

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    IS-IS runs directly over the data link alongside IP. On Ethernet, IS-IS packets are always 802.3 frames, with LSAPs 0xFEFE while IP packets are either Ethernet II

    frames or SNAP frames identified with the protocol number 0x800. OSPF runs over IP as protocol number 89.

    IS-IS runs directly over layer 2 and hence:

    – cannot support virtual links unless some explicit tunneling is implemented

    – packets are kept small so that they don’t require hop-by-hop fragmentation

    – uses ATM/SNAP encapsulation on ATM but there are hacks to make it use VcMux encapsulation

    – some operating systems that support IP networking have been implemented to differentiate Layer 3 packets in kernel. Such Oss require a lot of kernel

    modifications to support IS-IS for IP routing.

    – can never be routed beyond the immediate next hop and hence shielded from IP spoofing and similar Denial of Service attacks.

    Reference. https://tools.ietf.org/html/draft-bhatia-manral-diff-isis-ospf-00QUESTION 217

    Which command do you use to connect a dense-mode domain to a sparse-mode multicast domain?

    A. none, because there is no such command

    B. ip pim spt-threshold infinity

    C. ip pim register dense-mode

    D. ip pim dense-mode proxy-register

    Correct Answer: D

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    For IP PIM multicast, Cisco recommends Sparse-Mode over Dense-Mode. In the midst of our network migration, we have a new network operating in Sparse-

    Mode with Anycast rendezvous point (RP) but our existing network is still operating in Dense-Mode. To bridge two different modes across both PIM domains, we

    should use the ip pim dense-mode proxy-register command on the interface leading toward the bordering dense mode region. This configuration will enable the

    border router to register traffic from the dense mode region (which has no concept of registration) with the RP in the sparse mode domain.

    Reference. http://networkerslog.blogspot.com/2010/12/bridging-dense-mode-pim-to-sparse- mode.html

    QUESTION 218

    Which two statements about the function of a PIM designated router are true? (Choose two.)

    A. It forwards multicast traffic from the source into the PIM network.

    B. It registers directly connected sources to the PIM rendezvous point.

    C. It sends PIM Join/Prune messages for directly connected receivers.

    D. It sends IGMP queries.

    E. It sends PIM asserts on the interfaces of the outgoing interface list.

    Correct Answer: BC

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    In PIM ASM and SSM modes, the software chooses a designated router (DR) from the routers on each network segment. The DR is responsible for forwarding

    multicast data for specified groups and sources on that segment.In ASM mode, the DR is responsible for unicasting PIM register packets to the RP. When a DR receives an IGMP membership report from a directly connected

    receiver, the shortest path is formed to the RP, which may or may not go through the DR. The result is a shared tree that connects all sources transmitting on the

    same multicast group to all receivers of that group.

    In SSM mode, the DR triggers (*, G) or (S, G) PIM join messages toward the RP or the source. The path from the receiver to the source is determined hop by hop.

    The source must be known to the receiver or the DR.

    Reference. http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx- os/multicast/configuration/guide/n7k_multic_cli_5x/pim.html#wp1054047

    QUESTION 219

    Refer to the exhibit.

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Which IP packets will be accepted from EBGP neighbor 10.1.1.1?

    A. IP packets with a TTL count in the header that is equal to or greater than 253

    B. IP packets with a TTL count in the header that is equal to 253

    C. IP packets with a TTL count in the header that is equal to or greater than 2

    D. IP packets with a TTL count in the header that is equal to 2

    Correct Answer: A

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSUREReference. http://www.cisco.com/c/en/us/td/docs/ios/12_2s/feature/guide/fs_btsh.html

    QUESTION 220

    Refer to the exhibit.

    2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    A tunnel is configured between R3 to R4 sourced with their loopback interfaces. The ip pim sparse- dense mode command is configured on the tunnel interfaces

    and multicast-routing is enabled on R3 and R4. The IP backbone is not configured for multicast routing.

    The RPF check has failed toward the multicast source.

    Which two conditions could have caused the failure? (Choose two.)

    A. The route back to the RP is through a different interface than tunnel 0.

    B. The backbone devices can only route unicast traffic.

    C. The route back to the RP is through the same tunnel interface.

    D. A static route that points the RP to GigabitEthernet1/0 is configured.

    Correct Answer: AD

    Section: Layer 3 Technologies

    Explanation

    Explanation/Reference:

    Explanation:

    For a successful RPF verification of multicast traffic flowing over the shared tree (*,G) from RP, an ip mroute rp-address nexthop command needs to be

    configured for the RP address, that points to the tunnel interface.A very similar scenario can be found at the reference link below:

    Reference. http://www.cisco.com/c/en/us/support/docs/ip/ip-multicast/43584-mcast-over-gre.html

     

     

     

     

     

     

     

     

    Latest online browsing the 400-101 exam!

    400-101 PDF dumps & 400-101 VCE dumps: http://examsavior.com/400-101

      ES TK PS AT OB
     

    Examsavior

    Test King

    Pass4sure

    Actual Tests

    Other Brands

    Customer Reviews 5stars 1star 1star 1star 1star
     

    $89.99

    $124.99

    $125.99

    $189.00

    $29.99~$49.99

    Up-To-Dated Available NotAvailable NotAvailable NotAvailable NotAvailable
    Real Questions & Answers Available NotAvailable NotAvailable NotAvailable NotAvailable
    Correct All Error Available NotAvailable NotAvailable NotAvailable NotAvailable
    Premium VCE Dumps Available NotAvailable NotAvailable NotAvailable NotAvailable
    Free VCE Simulator Available NotAvailable NotAvailable NotAvailable NotAvailable
    Unlimited After One Time Purchasing Available NotAvailable NotAvailable NotAvailable NotAvailable
    Instant Download Available NotAvailable NotAvailable NotAvailable NotAvailable
    Printable PDF Dumps Available NotAvailable NotAvailable NotAvailable NotAvailable
    100% Pass Guarantee Available NotAvailable NotAvailable NotAvailable NotAvailable
    100% Money Back Available NotAvailable NotAvailable NotAvailable NotAvailable

    100% Pass:http://examsavior.com/

    146 Total Views 2 Views Today

    Topics: Cisco | Comments Off on 2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART10 (201-220) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

    Tagged with:

    Comments are closed.