• Recent Posts

  • AmazonExam

  • Braindumps

    Easy Pass Exams!
  • Testking

    Easy Pass Exams!
  • ExamCollection

    Easy Pass Exams!
  •  

    HOT 70-410 Exam VCE Dumps >> Free Download

    HOT 70-411 Exam VCE Dumps >> Free Download

    HOT 70-412 Exam VCE Dumps >> Free Download

    HOT 70-413 Exam VCE Dumps >> Free Download

    HOT 70-414 Exam VCE Dumps >> Free Download

    HOT 70-415 Exam VCE Dumps >> Free Download

    HOT 70-416 Exam VCE Dumps >> Free Download

    HOT 70-417 Exam VCE Dumps >> Free Download

    NEW 70-432 Exam VCE Dumps >> Free Download

    NEW 70-448 Exam VCE Dumps >> Free Download

    NEW 70-457 Exam VCE Dumps >> Free Download

    NEW 70-458 Exam VCE Dumps >> Free Download

    NEW 70-459 Exam VCE Dumps >> Free Download

    HOT 70-460 Exam VCE Dumps >> Free Download

    HOT 70-461 Exam VCE Dumps >> Free Download

    HOT 70-462 Exam VCE Dumps >> Free Download

    HOT 70-463 Exam VCE Dumps >> Free Download

    HOT 70-464 Exam VCE Dumps >> Free Download

    HOT 70-465 Exam VCE Dumps >> Free Download

    HOT 70-466 Exam VCE Dumps >> Free Download

    HOT 70-467 Exam VCE Dumps >> Free Download

    HOT 70-469 Exam VCE Dumps >> Free Download

    NEW 70-470 Exam VCE Dumps >> Free Download

    NEW 70-480 Exam VCE Dumps >> Free Download

    NEW 70-481 Exam VCE Dumps >> Free Download

    NEW 70-482 Exam VCE Dumps >> Free Download

    HOT 70-483 Exam VCE Dumps >> Free Download

    NEW 70-484 Exam VCE Dumps >> Free Download

    NEW 70-485 Exam VCE Dumps >> Free Download

    NEW 70-486 Exam VCE Dumps >> Free Download

    NEW 70-487 Exam VCE Dumps >> Free Download

    HOT 70-488 Exam VCE Dumps >> Free Download

    NEW 70-489 Exam VCE Dumps >> Free Download

    NEW 70-490 Exam VCE Dumps >> Free Download

    NEW 70-491 Exam VCE Dumps >> Free Download

    NEW 70-492 Exam VCE Dumps >> Free Download

    NEW 70-494 Exam VCE Dumps >> Free Download

    NEW 70-496 Exam VCE Dumps >> Free Download

    NEW 70-497 Exam VCE Dumps >> Free Download

    NEW 70-498 Exam VCE Dumps >> Free Download

    NEW 70-499 Exam VCE Dumps >> Free Download

    NEW 70-511 Exam VCE Dumps >> Free Download

    NEW 70-513 Exam VCE Dumps >> Free Download

    NEW 70-515 Exam VCE Dumps >> Free Download

    NEW 70-516 Exam VCE Dumps >> Free Download

    NEW 70-517 Exam VCE Dumps >> Free Download

    HOT 70-532 Exam VCE Dumps >> Free Download

    HOT 70-533 Exam VCE Dumps >> Free Download

    HOT 70-534 Exam VCE Dumps >> Free Download

    NEW 70-573 Exam VCE Dumps >> Free Download

    NEW 70-576 Exam VCE Dumps >> Free Download

    NEW 70-640 Exam VCE Dumps >> Free Download

    NEW 70-642 Exam VCE Dumps >> Free Download

    NEW 70-646 Exam VCE Dumps >> Free Download

    NEW 70-659 Exam VCE Dumps >> Free Download

    NEW 70-662 Exam VCE Dumps >> Free Download

    NEW 70-663 Exam VCE Dumps >> Free Download

    NEW 70-667 Exam VCE Dumps >> Free Download

    NEW 70-668 Exam VCE Dumps >> Free Download

    NEW 70-673 Exam VCE Dumps >> Free Download

    HOT 70-680 Exam VCE Dumps >> Free Download

    NEW 70-685 Exam VCE Dumps >> Free Download

    NEW 70-686 Exam VCE Dumps >> Free Download

    NEW 70-687 Exam VCE Dumps >> Free Download

    HOT 70-688 Exam VCE Dumps >> Free Download

    NEW 70-689 Exam VCE Dumps >> Free Download

    NEW 70-692 Exam VCE Dumps >> Free Download

    NEW 70-694 Exam VCE Dumps >> Free Download

    NEW 70-695 Exam VCE Dumps >> Free Download

    NEW 70-696 Exam VCE Dumps >> Free Download

    NEW 70-697 Exam VCE Dumps >> Free Download

    NEW 70-980 Exam VCE Dumps >> Free Download

    NEW 70-981 Exam VCE Dumps >> Free Download

    NEW 74-335 Exam VCE Dumps >> Free Download

    NEW 74-338 Exam VCE Dumps >> Free Download

    NEW 74-343 Exam VCE Dumps >> Free Download

    NEW 74-344 Exam VCE Dumps >> Free Download

    HOT 74-409 Exam VCE Dumps >> Free Download

    NEW 74-674 Exam VCE Dumps >> Free Download

    NEW 74-678 Exam VCE Dumps >> Free Download

    HOT 74-697 Exam VCE Dumps >> Free Download

    NEW 77-427 Exam VCE Dumps >> Free Download

  • « | Main | »

    [2016 NEW! 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q examB part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    By admin | July 28, 2016

    Tagged with:

     

    Do you want to pass the 70-411 examsavior exam? What are the new questions of the latest 70-411  exam? Braindumps 70-411  VCE dumps and 70-411  PDF dumps will tell you all about the 70-411 examsavior exam.Here are the examsavior newest and covered all new added questions and answers, which will help you 100% passing 70-411 examsavior exam.Hurry up and get the free exam from here! 

    NOW FREE DOWNLOAD

    http://examsavior.com/70-414

     

    Exam B
    QUESTION 1
    Your network contains two Active Directory forests named contoso.com and adatum.com. The
    contoso.com forest contains a server named Server1.contoso.com. The adatum.com forest contains a
    server named server2. adatum.com. Both servers have the Network Policy Server role service installed.
    The network contains a server named Server3. Server3 is located in the perimeter network and has the
    Network Policy Server role service installed.
    You plan to configure Server3 as an authentication provider for several VPN servers.
    You need to ensure that RADIUS requests received by Server3 for a specific VPN server are always
    forwarded to Server1.contoso.com.
    Which two should you configure on Server3? (Each correct answer presents part of the solution. Choose
    two.)
    A. Remediation server groups
    B. Remote RADIUS server groups
    C. Connection request policies
    D. Network policies
    E. Connection authorization policies
    Correct Answer: BC
    Section: 3. Configure network services and access
    Explanation
    Explanation/Reference:
    Last update: 15/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    To configure NPS as a RADIUS proxy, you must create a connection request policy that contains all of the
    information required for NPS to evaluate which messages to forward and where to send the messages.
    When you configure Network Policy Server (NPS) as a Remote Authentication Dial-In User Service
    (RADIUS) proxy, you use NPS to forward connection requests to RADIUS servers that are capable of
    processing the connection requests because they can perform authentication and authorization in the
    domain where the user or computer account is located. For example, if you want to forward connection
    requests to one or more RADIUS servers in untrusted domains, you can configure NPS as a RADIUS
    proxy to forward the requests to the remote RADIUS servers in the untrusted domain. To configure NPS as
    a RADIUS proxy, you must create a connection request policy that contains all of the information required
    for NPS to evaluate which messages to forward and where to send the messages.
    When you configure a remote RADIUS server group in NPS and you configure a connection request policy
    with the group, you are designating the location where NPS is to forward connection requests.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    http://technet.microsoft.com/en-us/library/cc754518.aspx
    QUESTION 2
    Your network contains an Active Directory domain named contoso.com. The domain contains a server
    named Server1 that runs Windows Server 2012 R2. Server1 has the Network Policy and Access Services
    server role installed.
    Your company’s security policy requires that certificate-based authentication must be used by some
    network services.
    You need to identify which Network Policy Server (NPS) authentication methods comply with the
    security policy.
    Which two authentication methods should you identify? (Each correct answer presents part of the
    solution. Choose two.)
    A. MS-CHAP
    B. PEAP-MS-CHAP v2
    C. Chap
    D. EAP-TLS
    E. MS-CHAP v2
    Correct Answer: BD
    Section: 4. Configure a Network Policy Server infrastructure
    Explanation
    Explanation/Reference:
    Explanation:
    PEAP is similar in design to EAP-TTLS, requiring only a server-side PKI certificate to create a secure TLS
    tunnel to protect user authentication, and uses server-side public key certificates to authenticate the
    server.
    When you use EAP with a strong EAP type, such as TLS with smart cards or TLS with certificates, both the
    client and the server use certificates to verify their identities to each other.
    Last update: 13/09/2015
    QUESTION 3
    Your network contains an Active Directory domain named adatum.com. The domain contains a file server
    named Server1 that runs Windows Server 2012 R2.
    All client computers run Windows 7.
    You need to ensure that user settings are saved to \\Server1\Users\.
    What should you do?
    A. From the properties of each user account, configure the Home folder settings.
    B. From a Group Policy object (GPO), configure the Folder Redirection settings.
    C. From the properties of each user account, configure the User profile settings.
    D. From a Group Policy object (GPO), configure the Drive Maps preference.
    Correct Answer: C
    Section: 6. Configure and manage Group Policy
    Explanation
    Explanation/Reference:
    Explanation:
    If a computer is running Windows 2000 Server or later on a network, users can store their profiles on the
    server. These profiles are called roaming user profiles.
    Last update: 13/09/2015
    QUESTION 4
    Your network contains an Active Directory domain named contoso.com. All domain controllers run
    Windows Server 2012 R2.
    An organizational unit (OU) named OU1 contains 200 client computers that run Windows 8 Enterprise. A
    Group Policy object (GPO) named GPO1 is linked to OU1.
    You make a change to GPO1.
    You need to force all of the computers in OU1 to refresh their Group Policy settings immediately.
    The solution must minimize administrative effort.
    Which tool should you use?
    A. Server Manager
    B. Active Directory Users and Computers
    C. The Gpupdate command
    D. Group Policy Management Console (GPMC)
    Correct Answer: D
    Section: 6. Configure and manage Group Policy
    Explanation
    Explanation/Reference:
    Last update: 17/09/2015
    Based on the actual exam and checked with and Premium account.
    Explanation:
    Starting with Windows Server?2012 and Windows?8, you can now remotely refresh Group Policy settings
    for all computers in an OU from one central location through the Group Policy Management Console
    (GPMC). Or you can use the Invoke- GPUpdatecmdlet to refresh Group Policy for a set of computers, not
    limited to the OU structure, for example, if the computers are located in the default computers container.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    http://technet.microsoft.com/en-us//library/jj134201.aspx
    http://blogs.technet.com/b/grouppolicy/archive/2012/11/27/group-policy-in-windows-server-2012-usingremote-
    gpupdate.aspx
    QUESTION 5
    Your network contains an Active Directory domain named contoso.com. The domain contains a domain
    controller named DC1 that runs Windows Server 2012 R2.
    All client computers run Windows 8 Enterprise.
    DC1 contains a Group Policy object (GPO) named GPO1.
    You need to update the PATH variable on all of the client computers.
    Which Group Policy preference should you configure?
    A. Ini Files
    B. Services
    C. Data Sources
    D. Environment
    Correct Answer: D
    Section: 6. Configure and manage Group Policy
    Explanation
    Explanation/Reference:
    Last update: 17/09/2015
    Based on the actual exam and checked with and Premium account.
    Explanation:

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    Group Policy settings have extensions that allow the amount of configurable preference settings within a
    GPO.
    You can use Group Policy to drive mappings, registry settings, local users and groups, services, files and
    folders manage, without having to learn a scripting language.
    With the help of the presetting element around user variables and system variables can be created,
    replace, updated and deleted.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    Environment Variable preference items allow you to create, update, replace, and delete user and system
    environment variables or semicolon-delimited segments of the PATH variable. Before you create an
    Environment Variable preference item, you should review the behavior of each type of action possible with
    this extension.
    QUESTION 6
    Your company has a main office and a branch office.
    The main office contains a server that hosts a Distributed File System (DFS) replicated folder.
    You plan to implement a new DFS server in the branch office.
    You need to recommend a solution that minimizes the amount of network bandwidth used to
    perform the initial synchronization of the folder to the branch office.
    You recommend using the Export-DfsrClone and Import-DfsrClonecmdlets.
    Which additional command or cmdlet should you include in the recommendation?
    A. Robocopy.exe
    B. Synchost.exe
    C. Export-BcCachePackage
    D. Sync-DfsReplicationGroup
    Correct Answer: A
    Section: 2. Configure file and print services
    Explanation
    Explanation/Reference:
    Last update: 15/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    By preseeding files before you set up DFS Replication, add a new replication partner, or replace a server,
    you can speed up initial synchronization and enable cloning of the DFS Replication database in Windows
    Server 2012 R2. The Robocopy method is one of several preceding methods
    QUESTION 7
    Your network contains an Active Directory domain named contoso.com. The domain contains two servers
    named Server1 and Server2. Both servers run Windows Server 2012 R2. Both servers have the File and
    Storage Services server role, the DFS Namespaces role service, and the DFS Replication role service
    installed.
    Server1 and Server2 are part of a Distributed File System (DFS) Replication group named Group1.
    Server1 and Server2 are separated by a low-speed WAN connection.
    You need to limit the amount of bandwidth that DFS can use to replicate between Server1 and
    Server2.
    What should you modify?
    A. The referral ordering of the namespace
    B. The staging quota of the replicated folder
    C. The cache duration of the namespace
    D. The schedule of the replication group
    Correct Answer: D
    Section: 2. Configure file and print services
    Explanation
    Explanation/Reference:
    Last update: 15/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    Scheduling allows less bandwidth the by limiting the time interval of the replication Does DFS Replication
    throttle bandwidth per schedule, per server, or per connection? If you configure bandwidth throttling when
    specifying the schedule, all connections for that replication group will use that setting for bandwidth
    throttling. Bandwidth throttling can be also set as a connection-level setting using DFS Management.
    To edit the schedule and bandwidth for a specific connection, use the following steps:
    In the console tree under the Replication node, select the appropriate replication group. Click the
    Connections tab, right-click the connection that you want to edit, and then click Properties.
    Click the Schedule tab, select Custom connection schedule and then click Edit Schedule. Use the Edit
    Schedule dialog box to control when replication occurs, as well as the maximum amount of bandwidth
    replication can consume.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    QUESTION 8
    You have a file server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server
    Resource Manager role service installed.
    Files created by users in the human resources department are assigned the Department classification
    property automatically.
    You are configuring a file management task named Task1 to remove user files that have not been
    accessed for 60 days or more.
    You need to ensure that Task1 only removes files that have a Department classification property of
    human resources. The solution must minimize administrative effort.
    What should you configure on Task1?
    A. Configure a file screen
    B. Create a condition
    C. Create a classification rule
    D. Create a custom action
    Correct Answer: B
    Section: 2. Configure file and print services
    Explanation
    Explanation/Reference:
    Last update: 15/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    Create a File Expiration Task
    The following procedure guides you through the process of creating a file management task for expiring
    files. File expiration tasks are used to automatically move all files that match certain criteria to a specified
    expiration directory, where an administrator can then back those files up and delete them. Property
    conditions. Click Add to create a new condition based on the file’s classification. This will open the Property
    Condition dialog box, which allows you to select a property, an operator to perform on the property, and the
    value to compare the property against. After clicking OK, you can then create additional conditions, or edit
    or remove an existing condition.
    QUESTION 9
    Your network contains an Active Directory domain named contoso.com. All domain controllers run
    Windows Server 2012 R2. You plan to use fine-grained password policies to customize the password
    policy settings ofcontoso.com.
    You need to identify to which Active Directory object types you can directly apply the fine- grained
    password policies.
    Which two object types should you identify? (Each correct answer presents part of the solution. Choose
    two.)
    A. Users
    B. Global groups
    C. computers
    D. Universal groups
    E. Domain local groups
    Correct Answer: AB
    Section: 5. Configure and manage Active Directory
    Explanation
    Explanation/Reference:
    Last update: 17/09/2015
    Based on the actual exam and checked with and Premium account.
    Explanation:
    First off, your domain functional level must be at Windows Server 2008. Second, Fine- grained password
    policies ONLY apply to user objects, and global security groups. Linking them to universal or domain local
    groups is ineffective. I know what you’re thinking, what about OU’s? Nope, Fine-grained password policy
    cannot be applied to an organizational unit (OU) directly. The third thing to keep in mind is, by default only
    members of the Domain Admins group can set fine-grained password policies. However, you can delegate
    this ability to other users if needed.
    Fine-grained password policies apply only to user objects (or inetOrgPerson objects if they are used
    instead of user objects) and global security groups.
    You can apply Password Settings objects (PSOs) to users or global security groups:
    http://technet.microsoft.com/en-us/library/cc770848%28v=ws.10%29.aspx
    http://www.brandonlawson.com/active-directory/creating-fine-grained-password-policies/
    QUESTION 10
    You have a cluster named Cluster1 that contains two nodes. Both nodes run Windows Server 2012 R2.
    Cluster1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
    You configure a custom service on VM1 named Service1.
    You need to ensure that VM1 will be moved to a different node if Service1 fails.
    Which cmdlet should you run on Cluster1?
    A. Add-ClusterVmMonitoredItem
    B. Add-ClusterGenericServiceRole
    C. Set-ClusterResourceDependency
    D. Enable VmResourceMetering
    Correct Answer: A
    Section: 1. Deploy and manage server images
    Explanation
    Explanation/Reference:
    Last update: 15/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    The Add-ClusterVMMonitoredItem cmdlet configures monitoring for a service or an Event Tracing for
    Windows (ETW) event so that it is monitored on a virtual machine. If the service fails or the event occurs,
    then the system responds by taking an action based on the failover configuration for the virtual machine
    resource. For example, the configuration might specify that the virtual machine be restarted.
    QUESTION 11
    You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Windows Server
    Update Services server role installed.
    You need to configure Windows Server Update Services (WSUS) to support Secure Sockets Layer
    (SSL).
    Which three actions should you perform? (Each correct answer presents part of the solution. Choose
    three.)
    A. From Internet Information Services (IIS) Manager, modify the connection strings of the WSUS website.
    B. Install a server certificate.
    C. Run the wsusutil.exe command.
    D. Run the iisreset.exe command.
    E. From Internet Information Services (IIS) Manager, modify the bindings of the WSUS website.
    Correct Answer: BCE
    Section: 1. Deploy and manage server images
    Explanation
    Explanation/Reference:
    Last update: 14/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    Certficate needs to be installed to IIS, Bindings modifies and wsutil run.
    1. First we need to request a certificate for the WSUS web site, so open IIS, click the server name, then
    open Server Certificates.
    On the Actions pane click Create Domain Certificate.
    2. To add the signing certificate to the WSUS Web site in IIS 7.0
    On the WSUS server, open Internet Information Services (IIS) Manager.
    Expand Sites, right-click the WSUS Web site, and then click Edit Bindings.
    In the Site Binding dialog box, select the https binding, and click Edit to open the Edit Site Binding dialog
    box.
    Select the appropriate Web server certificate in the SSL certificate box, and then click OK.
    Click Close to exit the Site Bindings dialog box, and then click OK to close Internet Information Services
    (IIS) Manager.
    3. WSUSUtil.exe configuressl<FQDN of the software update point site system> (the name in your
    certificate) WSUSUtil.exe configuressl<Intranet FQDN of the software update point site system>.
    4. The next step is to point your clients to the correct url, by modifying the existing GPO or creating a new
    one. Open the policy Specify intranet Microsoft update service location and type the new url in the form
    https: //YourWSUSserver.
    The gpupdate /force command will just download all the GPO’s and re-apply them to the client, it won’t
    force the client to check for updates. For that you need to use wuauclt /resetautorization /detectnow
    followed by wuauclt /reportnow
    http://technet.microsoft.com/en-us/library/bb680861.aspx
    http://technet.microsoft.com/en-us/library/bb633246.aspx
    http://www.vkernel.ro/blog/configure-wsus-to-use-ssl
    QUESTION 12
    You have a server named Server1 that runs Windows Server 2012 R2.
    You discover that the performance of Server1 is poor.
    The results of a performance report generated on Server1 are shown in the following table.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    You need to identify the cause of the performance issue.
    What should you identify?
    A. Driver malfunction
    B. Insufficient RAM
    C. Excessive paging
    D. NUMA fragmentation
    Correct Answer: A
    Section: 1. Deploy and manage server images
    Explanation
    Explanation/Reference:
    Explanation:
    Processor: %DPC Time. Much like the other values, this counter shows the amount of time that the
    processor spends servicing DPC requests. DPC requests are more often than not associated with the
    network interface.
    Processor: % Interrupt Time. This is the percentage of time that the processor is spending on handling
    Interrupts. Generally, if this value exceeds 50% of the processor time you may have a hardware issue.
    Some components on the computer can force this issue and not really be a problem. For example a
    programmable I/O card like an old disk controller card, can take up to 40% of the CPU time. A NIC on a
    busy IIS server can likewise generate a large percentage of processor activity.
    Processor: % User Time. The value of this counter helps to determine the kind of processing that is
    affecting the system. Of course the resulting value is the total amount of non-idle time that was spent on
    User mode operations. This generally means application code.
    Processor: %Privilege Time. This is the amount of time the processor was busy with Kernel mode
    operations. If the processor is very busy and this mode is high, it is usually an indication of some type of
    NT service having difficulty, although user mode programs can make calls to the Kernel mode NT
    components to occasionally cause this type of performance issue.
    Memory: Pages/sec. This value is often confused with Page Faults/sec. The Pages/sec counter is a
    combination of Pages Input/sec and Pages Output/sec counters. Recall that Page Faults/sec is a
    combination of hard page faults and soft page faults. This counter, however, is a general indicator of how
    often the system is using the hard drive to store or retrieve memory associated data.
    http://technet.microsoft.com/en-us/library/cc768048.aspx
    QUESTION 13
    Your network contains an Active Directory domain named contoso.com. The domain contains two member
    servers named Server1 and Server2. All servers run Windows Server 2012 R2.
    Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. Cluster1 hosts 10 virtual machines.
    All of the virtual machines run Windows Server 2012 R2 and are members of the domain.
    You need to ensure that the first time a service named Service1 fails on a virtual machine, the virtual
    machine is moved to a different node.
    You configure Service1 to be monitored from Failover Cluster Manager.
    What should you configure on the virtual machine?
    A. From the General settings, modify the Startup type.
    B. From the General settings, modify the Service status.
    C. From the Recovery settings of Service1, set the First failure recovery action to Take No Action.
    D. From the Recovery settings of Service1, set the First failure recovery action to Restart the Service.
    Correct Answer: C
    Section: 1. Deploy and manage server images
    Explanation
    Explanation/Reference:
    Last update: 15/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    Configure the virtual machine to take no action through Hyper-V if the physical computer shuts down by
    modifying the Automatic Stop Action setting to None. Virtual machine state must be managed through the
    Failover Clustering feature.
    Virtual machine application monitoring and management In clusters running Windows Server 2012,
    administrators can monitor services on clustered virtual machines that are also running Windows Server
    2012. This functionality extends the high-level monitoring of virtual machines that is implemented in
    Windows Server 2008 R2 failover clusters. If a monitored service in a virtual machine fails, the service can
    be restarted, or the clustered virtual machine can be restarted or moved to another node (depending on
    service restart settings and cluster failover settings). This feature increases the uptime of high availability
    services that are running on virtual machines within a failover cluster.
    Windows Server 2012 Failover Cluster introduces a new capability for Hyper-V virtual machines (VMs),
    which is a basic monitoring of a service within the VM which causes the VM to be rebooted should the
    monitored service fail three times. For this feature to work the following must be configured:
    Both the Hyper-V servers must be Windows Server 2012 and the guest OS running in theVM must be
    Windows Server 2012.
    The host and guest OSs are in the same or at least trusting domains. The Failover Cluster administrator
    must be a member of the local administrator’s group inside the VM.
    Ensure the service being monitored is set to Take No Action (see screen shot below) within the guest VM
    for Subsequent failures (which is used after the first and second failures) and is set via the Recovery tab of
    the service properties within the Services application (services. msc).

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    Within the guest VM, ensure the Virtual Machine Monitoring firewall exception is enabled for the Domain
    network by using the Windows Firewall with Advanced Security application or by using the Windows
    PowerShell command below: Set-NetFirewallRule -DisplayGroup "Virtual Machine Monitoring" -Enabled
    True
    After the above is true, enabling the monitoring is a simple process:
    Launch the Failover Cluster Manager tool.
    Navigate to the cluster – Roles.
    Right click on the virtual machine role you wish to enable monitoring for and under More Actions select
    Configure Monitoring. . .

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    The services running inside the VM will be gathered and check the box for the services that should be
    monitored and click OK.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    You are done!
    Monitoring can also be enabled using the Add-ClusterVMMonitoredItemcmdlet and – VirtualMachine, with
    the -Service parameters, as the example below shows: PS
    C:\Windows\system32> Add-ClusterVMMonitoredItem -VirtualMachine savdaltst01 – Service spooler
    http://sportstoday.us/technology/windows-server-2012-continuous-availability-%28part-4%29-failoverclustering-
    enhancements-virtual-machine-monitoring.aspx
    http://windowsitpro.com/windows-server-2012/enable-windows-server-2012-failover-cluster-hyper-v-vmmonitoring
    http://technet.microsoft.com/en-us/library/cc742396.aspx
    QUESTION 14
    You have a DNS server named Server1 that runs Windows Server 2012 R2. On Server1, you create a
    DNS zone named contoso.com.
    You need to specify the email address of the person responsible for the zone.
    Which type of DNS record should you configure?
    A. Start of authority (SOA)
    B. Host information (HINFO)
    C. Mailbox (MB)
    D. Mail exchanger (MX)
    Correct Answer: A
    Section: 3. Configure network services and access
    Explanation
    Explanation/Reference:
    Last update: 16/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    A SOA-record defines the responsible person for an entire zone, but a zone may contain many individual
    hosts / domain names for which different people are responsible. The RP- record type makes it possible to
    identify the responsible person for individual host names contained within the zone.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    QUESTION 15
    Your network contains an Active Directory forest. The forest contains two domains named contoso.com
    and fabrikam.com. All of the DNS servers in both of the domains run Windows Server 2012 R2.
    The network contains two servers named Server1 and Server2. Server1 hosts an Active Directoryintegrated
    zone for contoso.com. Server2 hosts an Active Directory-integrated zone for fabrikam.com.
    Server1 and Server2 connect to each other by using a WAN link.
    Client computers that connect to Server1 for name resolution cannot resolve names in fabrikam.com.
    You need to configure Server1 to resolve names in fabrikam.com. The solution must NOT require
    that changes be made to the fabrikam.com zone on Server2.
    What should you create?
    A. A trust anchor
    B. A stub zone
    C. A zone delegation
    D. A secondary zone
    Correct Answer: B
    Section: 3. Configure network services and access
    Explanation
    Explanation/Reference:
    Last update: 16/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    A stub zone is a copy of a zone that contains only those resource records necessary to identify the
    authoritative Domain Name System (DNS) servers for that zone. A stub zone is used to resolve names
    between separate DNS namespaces. This type of resolution may be necessary when a corporate merger
    requires that the DNS servers for two separate DNS namespaces resolve names for clients in both
    namespaces.
    QUESTION 16
    Your network is configured as shown in the exhibit. (Click the Exhibit button.)

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    Server1 regularly accesses Server2.
    You discover that all of the connections from Server1 to Server2 are routed through Router1.
    You need to optimize the connection path from Server1 to Server2.
    Which route command should you run on Server1?
    A. Route add -p 10.10.10.0 MASK 255.255.255.0 172.23.16.2 METRIC 100
    B. Route add -p 10.10.10.0 MASK 255.255.255.0 10.10.10.1 METRIC 50
    C. Route add -p 10.10.10.12 MASK 255.255.255.0 10.10.10.1 METRIC 100
    D. Route add -p 10.10.10.12 MASK 255.255.255.0 10.10.10.0 METRIC 50
    Correct Answer: A
    Section: 3. Configure network services and access
    Explanation
    Explanation/Reference:
    Last update: 16/09/2015
    Based on the actual exam and checked with an Premium account.
    note2:
    Server1 is configured with the IP address 172.23.16.1 as the default gateway. As a result, all packets that
    are not destined for the local subnet is sent to Router1. To configure Server1 with an alternative and more
    direct route for the subnet 10.10.10.0/24, we can create a persistent network route and specify the
    subnetzlokale as seen from Server1 interface of Router2 as a gateway.
    Explanation:
    Destination – specifies either an IP address or host name for the network or host.
    subnetmask – specifies a subnet mask to be associated with this route entry. If subnetmask is not
    specified, 255.255.255.255 is used.
    gateway – specifies either an IP address or host name for the gateway or router to use when forwarding.
    costmetric – assigns an integer cost metric (ranging from 1 through 9,999) to be used in calculating the
    fastest, most reliable, and/or least expensive routes. If costmetric is not specified, 1 is used.
    interface – specifies the interface to be used for the route that uses the interface number. If an interface is
    not specified, the interface to be used for the route is determined from the gateway IP address.
    http://support.microsoft.com/kb/299540/en-us
    http://technet.microsoft.com/en-us/library/cc757323%28v=ws.10%29.aspx
    QUESTION 17
    Your network contains an Active Directory domain named adatum.com.
    You have a standard primary zone named adatum.com.
    You need to provide a user named User1 the ability to modify records in the zone. Other users
    must be prevented from modifying records in the zone.
    What should you do first?
    A. Run the Zone Signing Wizard for the zone.
    B. From the properties of the zone, modify the start of authority (SOA) record.
    C. From the properties of the zone, change the zone type.
    D. Run the New Delegation Wizard for the zone.
    Correct Answer: C
    Section: 3. Configure network services and access
    Explanation
    Explanation/Reference:
    Last update: 16/09/2015
    Before "answer c" but then I change to "B", Based on the actual exam and checked with an Premium
    account.
    Explanation:
    The Zone would need to be changed to a AD integrated zone When you use directory- integrated zones,
    you can use access control list (ACL) editing to secure a dnsZone object container in the directory tree.
    This feature provides detailed access to either the zone or a specified resource record in the zone. For
    example, an ACL for a zone resource record can be restricted so that dynamic updates are allowed only
    for a specified client computer or a secure group, such as a domain administrators group. This security
    feature is not available with standard primary zones
    DNS update security is available only for zones that are integrated into Active Directory. After you integrate
    a zone, you can use the access control list (ACL) editing features that are available in the DNS snap-in to
    add or to remove users or groups from the ACL for a specific zone or for a resource record.
    Standard (not an Active Directory integrated zone) has no Security settings:

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    You need to firstly change the "Standard Primary Zone" to AD Integrated Zone:[2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    Your network contains an Active Directory domain named contoso.com. The domain contains a file server
    named Server1 that runs Windows Server 2012 R2.
    You view the effective policy settings of Server1 as shown in the exhibit. (Click the Exhibit button.)

    You need to ensure that an entry is added to the event log whenever a local user account is created
    or deleted on Server1.
    What should you do?
    A. In Servers GPO, modify the Advanced Audit Configuration settings.
    B. On Server1, attach a task to the security log.
    C. In Servers GPO, modify the Audit Policy settings.
    D. On Server1, attach a task to the system log.
    Correct Answer: A
    Section: 6. Configure and manage Group Policy
    Explanation
    Explanation/Reference:
    Explanation:
    When you use Advanced Audit Policy Configuration settings, you need to confirm that these settings are
    not overwritten by basic audit policy settings. The following procedure shows how to prevent conflicts by
    blocking the application of any basic audit policy settings.
    Enabling Advanced Audit Policy Configuration
    Basic and advanced audit policy configurations should not be mixed. As such, it’s best practice to enable
    Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category
    settings in Group Policy to make sure that basic auditing is disabled. The setting can be found under
    Computer Configuration\Policies\Security Settings\Local Policies\Security Options, and sets the
    SCENoApplyLegacyAuditPolicy registry key to prevent basic auditing being applied using Group Policy
    and the Local Security Policy MMC snap-in.
    In Windows 7 and Windows Server 2008 R2, the number of audit settings for which success and failure
    can be tracked has increased to 53. Previously, there were nine basic auditing settings under Computer
    Configuration\Policies\Windows Settings\Security Settings\Local Policies\Audit Policy. These 53 new
    settings allow you to select only the behaviors that you want to monitor and exclude audit results for
    behaviors that are of little or no concern to you, or behaviors that create an excessive number of log
    entries. In addition, because Windows 7 and Windows Server 2008 R2 security audit policy can be applied
    by using domain Group Policy, audit policy settings can be modified, tested, and deployed to selected
    users and groups with relative simplicity.
    Audit Policy settings
    Any changes to user account and resource permissions.
    Any failed attempts for user logon.
    Any failed attempts for resource access.
    Any modification to the system files.
    Advanced Audit Configuration SettingsAudit compliance with important business-related and securityrelated
    rules by tracking precisely defined activities, such as:
    A group administrator has modified settings or data on servers that contain finance information.
    An employee within a defined group has accessed an important file. The correct system access control list
    (SACL) is applied to every file and folder or registry key on a computer or file share as a verifiable
    safeguard against undetected access.
    In Servers GPO, modify the Audit Policy settings – enabling audit account management setting will
    generate events about account creation, deletion and so on.
    Advanced Audit Configuration SettingsAdvanced Audit Configuration Settings ->Audit Policy -> Account
    Management -> Audit User Account Management

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    In Servers GPO, modify the Audit Policy settings – enabling audit account management setting will
    generate events about account creation, deletion and so on.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    QUESTION 19
    Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
    2012 R2.
    The network contains several group Managed Service Accounts that are used by four member servers.
    You need to ensure that if a group Managed Service Account resets a password of a domain user account,
    an audit entry is created.
    You create a Group Policy object (GPO) named GPO1.
    What should you do next?
    A. In GPO1, configure the Advanced Audit Policy Configuration settings for Audit User Account
    Management. Link GPO1 to the Domain Controllers organizational unit (OU).
    B. In GPO1, configure the Advanced Audit Policy Configuration settings for Audit User Account
    Management. Move the member servers to a new organizational unit (OU). Link GPO1 to the new OU.
    C. In GPO1, configure the Advanced Audit Policy Configuration settings for Audit Sensitive Privilege Use.
    Link GPO1 to the Domain Controllers organizational unit (OU).
    D. In GPO1, configure the Advanced Audit Policy Configuration settings for Audit Sensitive Privilege Use.
    Move the member servers to a new organizational unit (OU). Link GPO1 to the new OU.
    Correct Answer: A
    Section: 6. Configure and manage Group Policy
    Explanation
    Explanation/Reference:
    Last update: 17/09/2015
    Based on the actual exam and checked with and Premium account.
    Explanation:
    Audit User Account Management
    This security policy setting determines whether the operating system generates audit events when the
    following user account management tasks are performed:
    A user account is created, changed, deleted, renamed, disabled, enabled, locked out, or unlocked.
    A user account password is set or changed.
    Security identifier (SID) history is added to a user account.
    The Directory Services Restore Mode password is set.
    Permissions on accounts that are members of administrators groups are changed.
    Credential Manager credentials are backed up or restored.
    This policy setting is essential for tracking events that involve provisioning and managing user accounts.
    QUESTION 20
    Your network contains an Active Directory domain named contoso.com. The domain contains a server
    named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role
    service installed.
    You configure a quota threshold as shown in the exhibit. (Click the Exhibit button.)

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    You need to ensure that a user named User1 receives an email notification when the threshold is
    exceeded.
    What should you do?
    A. Create a performance counter alert.
    B. Create a classification rule.
    C. Modify the members of the Performance Log Users group.
    D. Configure the File Server Resource Manager Options.
    Correct Answer: D
    Section: 2. Configure file and print services
    Explanation
    Explanation/Reference:
    Last update: 15/09/2015
    Based on the actual exam and checked with an Premium account.
    Explanation:
    When you create quotas and file screens, you have the option of sending e-mail notifications to users
    when their quota limit is approaching or after they have attempted to save files that have been blocked. If
    you want to routinely notify certain administrators of quota and file screening events, you can configure one
    or more default recipients.
    To send these notifications, you must specify the SMTP server to be used for forwarding the e-mail
    messages.
    To configure e-mail options
    In the console tree, right-click File Server Resource Manager, and then click Configure options. The File
    Server Resource Manager Options dialog box opens.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    On the E-mail Notifications tab, under SMTP server name or IP address, type the host name or the IP
    address of the SMTP server that will forward e-mail notifications.
    If you want to routinely notify certain administrators of quota or file screening events, under Default
    administrator recipients, type each e-mail address.
    Use the format account@domain. Use semicolons to separate multiple accounts.
    To test your settings, click Send Test E-mail.

    [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure [2016 NEW 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q exam B part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    Latest online browsing the 70-411 exam!

    70-411 PDF dumps & 70-411 VCE dumps: http://examsavior.com/70-411

      ES TK PS AT OB
     

    Examsavior

    Test King

    Pass4sure

    Actual Tests

    Other Brands

    Customer Reviews 5stars 1star 1star 1star 1star
     

    $89.99

    $124.99

    $125.99

    $189.00

    $29.99~$49.99

    Up-To-Dated Available NotAvailable NotAvailable NotAvailable NotAvailable
    Real Questions & Answers Available NotAvailable NotAvailable NotAvailable NotAvailable
    Correct All Error Available NotAvailable NotAvailable NotAvailable NotAvailable
    Premium VCE Dumps Available NotAvailable NotAvailable NotAvailable NotAvailable
    Free VCE Simulator Available NotAvailable NotAvailable NotAvailable NotAvailable
    Unlimited After One Time Purchasing Available NotAvailable NotAvailable NotAvailable NotAvailable
    Instant Download Available NotAvailable NotAvailable NotAvailable NotAvailable
    Printable PDF Dumps Available NotAvailable NotAvailable NotAvailable NotAvailable
    100% Pass Guarantee Available NotAvailable NotAvailable NotAvailable NotAvailable
    100% Money Back Available NotAvailable NotAvailable NotAvailable NotAvailable

    100% Pass:http://examsavior.com/

    68 Total Views 2 Views Today

    Topics: Microsoft | Comments Off on [2016 NEW! 70-411 Exam] Microsoft Braindumps Microsoft.70-411 by.Sacriestory&PP_PP.366q examB part1(1-20) Exam VCE Dumps For free download with 100%pass ensure

    Tagged with:

    Comments are closed.